30W 3D Curve Surface Laser Marker on U Flash Disk iPhone
MAN-3D-30W
Advantage:
High speed, only 2-3 minutes for one 3D portrait engraving, suitable to tourist resorts
Good engrave quality, high solution. The pattern of engraving is exquisite, crystal-clear and strong tri-dimensional sense.
Use the imported air cooling laser system, stable, easy maintenance
Non-touch style process ensures that the surface of the crystalline lens keeps its.
1. The higher speed:
High-power fiber laser technology. In addition to 30W, also developed the same type of laser engraving
machine maximum power - 100W new air-cooled models, significantly improves the marking speed,
improve production efficiency and quality marking.
2. The depth is more suitable for carving:
Traditional scanning methods, performed with laser engraving, getting away from the focus of the working
surface, the energy transfer can not fully enter the state. The dynamic marking, engraving during the
process and can automatically adjust the focal length of the machined surface with the highest energy
density always be engraved.
03. more precision:
Traditional uses fixed focus laser marking marking, machining range over the General Assembly was in
the defocus state. Three-axis scanning system can arbitrarily change the traditional focus of fixed focal
laser marking machine, always achieve the workpiece dimensions of angle engraving, machining.
04 .adapted to a variety of shapes carved:
Three-axis control can be achieved freely control the focal length, in any shape can be high-precision
marking. Not only can deal with all kinds of stepped surfaces, but also to achieve a variety of shapes
engraved undifferentiated. Only pre-registered shape of the workpiece, only the switch corresponding
to the focal length can be set for different products, engraving position and shape change. Without
physically moving the workpiece or laser engraving machine to complete the switching operation.
05. large-scale high-precision:
Precise marking on large 110mm * 110mm area. In the realization of the Z-axis line of the variable focal
length 40mm. F region due to the elimination of the traditional characteristics of the lens due to
deformation, distortion by three-axis control, spot deviation. Even in the compliance area edge can be
precise focus and achieve undifferentiated engraving.
06. more convenient:
Simply choose from standard shapes can be easily converted into a 3D setting. Can confirm that the
three-dimensional preview screen side edges to adjust the size or location. Easy preview.
Laser |
Output Power |
30W |
50W |
100W |
|
Pulse energy |
1mj |
1mj |
1mj |
|
Repetition frequency |
30K-200KHZ |
50K-200KHZ |
5K-100KHZ |
|
Laser wavelength |
1064nm |
1064nm |
1064nm |
Crafts |
Marking Range |
110mm*110mm |
110mm*110mm |
175mm*175mm |
|
Adjustable range |
175mm*175mm
300mm*300mm |
175mm*175mm
300mm*300mm |
300mm*300mm |
|
Focus Range |
≤±20mm |
≤±20mm |
≤±20mm |
|
Marking the way |
XYZTriaxial Dynamic Focus |
XYZTriaxial Dynamic Focus |
XYZTriaxial Dynamic Focus |
|
The minimum line width |
0.03mm |
0.03mm |
0.03mm |
Software |
Marking speed |
≤10000mm/s |
≤10000mm/s |
≤10000mm/s |
|
Operating system |
WINXP / WIN7 / full 3D view of the operation |
|
Support fonts |
TrueType fonts, AUTOCAD single line fonts, custom font |
|
One-dimensional bar code |
CODE39/CODE128/ITF/CODABAR/EAN/UPCWait |
|
Dimensional bar code |
QR/PDF417/DATAMatrix(ECC200)Wait |
|
Input File |
PLT/DXF/DWG/SWG/STL/BMP/JPG/J[EG/PNG/TIFWait |
Machine |
Environmental Requirements |
Temperature of 10 ºC -35 ºC Humidity: 5% -75% |
|
Input Power |
Single phase 110V / 220V / optional / 50 ~ 60HZ |
|
Total power consumption |
≤750W |
≤1200W |
≤1500W |
|
Cooling |
Air-cooled |
Air-cooled |
Air-cooled |
|
Control Interface |
PCI-Express / USB-2.0 Optional |
PCI-Express / USB-2.0 Optional |
PCI-Express / USB-2.0 Optional |